Description
The ENGL Power Tap Pro 8 is a compact, fully isolated pedal power supply designed to keep modern guitar and bass rigs running quietly and reliably. With eight isolated outputs, ultra low noise circuitry and robust protection features, it delivers clean, stable power to everything from hungry digital processors to classic analogue stompboxes. Built for studio, rehearsal and stage use, the Power Tap Pro 8 offers a generous 3300mA of total output capacity, including a dedicated 12V high current output for demanding gear. Individual LED indicators make it easy to see the status of each output at a glance, while the slim, lightweight enclosure slips neatly onto crowded pedalboards without adding unnecessary bulk. Clean, Isolated Power for Modern Pedalboards Each of the eight outputs on the Power Tap Pro 8 is fully isolated, helping to eliminate ground loops and unwanted interference between pedals. This isolation keeps your signal path cleaner and more consistent, so your tone stays focused whether you are running a simple board or a complex multi-pedal setup. High Current Output for Digital Gear A dedicated 12V DC output rated at 2000mA provides ample current for compatible modelling processors and power hungry digital effects. This allows you to run more demanding units from the same power supply as your standard pedals, reducing clutter and simplifying your rig. Optimised Outputs for Analogue and Digital Pedals Alongside the 12V output, the Power Tap Pro 8 includes a 9V / 500mA and 9V / 300mA output for higher draw digital pedals, plus five 9V / 100mA outputs ideal for many analogue effects. This mix of outputs lets you power a wide range of pedals correctly, helping them perform at their best and reducing the risk of noise or instability caused by underpowered devices. Protected, Quiet and Pedalboard Friendly Ultra low noise circuitry keeps hum and hiss to a minimum, making the Power Tap Pro 8 suitable for recording as well as live use. Built in short circuit and overload protection help safeguard connected pedals, while individual LEDs show when each output is active and automatically switch off if a fault is detected. At just 140 x 60 x 25mm and 230g, it is easy to integrate into almost any board layout. Key Features Eight Fully Isolated Outputs – Each output is electrically isolated to help prevent ground loops and cross noise between pedals, resulting in a cleaner signal and more consistent tone across your entire board. Dedicated 12V / 2000mA High Current Output – The powerful 12V output can supply up to 2000mA, making it suitable for compatible modelling units and digital processors that require more current than a standard pedal supply can offer. Ultra Low Noise Circuitry with Built In Protection – Designed for quiet operation, the Power Tap Pro 8 keeps unwanted noise to a minimum, while integrated short circuit and overload protection help protect your pedals from electrical faults. Compact, Lightweight Enclosure with LED Status Indicators – The slim 140 x 60 x 25mm housing and 230g weight make it easy to fit on busy pedalboards, and individual LEDs for each output provide instant visual confirmation of power status and fault conditions. SpecificationsGeneral Brand: ENGL Amps Model: Power Tap Pro 8 Product Type: Isolated Pedal Power Supply Accessory Type: Pedal Power Supply Instrument: Guitar / Bass Premium Product: Yes Power Outputs Number of Outputs: 8 Output Isolation: Fully isolated Output 1: 12V DC / 2000mA Output 2: 9V DC / 500mA Output 3: 9V DC / 300mA Outputs 4 to 8: 9V DC / 100mA each Output Voltage: 9V / 12V Maximum Individual Output Current: 2000mA High Current Outputs: Yes Total Rated Output Capacity: 3300mA Power Input and Protection Power Input: 18V DC Noise Reduction: Ultra low noise circuitry Short Circuit Protection: Yes Overload Protection: Yes Indicators LED Indicators: Individual LED per output Fault Indication: LED switches off on fault or overload Physical Dimensions: 140 x 60 x 2…
